Droplet Formation Research Articles

Biofabrication of 3D adipose tissue via assembly of composite stem cell spheroids containing adipo-inductive dual-signal delivery nanofibers.

Reconstruction of large 3D tissues based on assembly of micro-sized multi-cellular spheroids has gained attention in tissue engineering. However, formation of 3D adipose tissue from spheroids has been challenging due to the limited adhesion capability and restricted cell mobility of adipocytes in culture media. In this study, we addressed this problem by developing adipo-inductive nanofibers enabling dual delivery of indomethacin and insulin. These nanofibers were introduced into composite spheroids comprising human adipose-derived stem cells (hADSCs). This approach led to a significant enhancement in the formation of uniform lipid droplets, as evidenced by the significantly increased Oil red O-stained area in spheroids incorporating indomethacin and insulin dual delivery nanofibers (56.9 ± 4.6%) compared to the control (15.6 ± 3.5%) with significantly greater gene expression associated with adipogenesis (C/EBPA, PPARG, FABP4, and adiponectin) of hADSCs. Furthermore, we investigated the influence of culture media on the migration and merging of spheroids and observed significant decrease in migration and merging of spheroids in adipogenic differentiation media. Conversely, the presence of adipo-inductive nanofibers promoted spheroid fusion, allowing the formation of macroscopic 3D adipose tissue in the absence of adipogenic supplements while facilitating homogeneous adipogenesis of hADSCs. The approach described here holds promise for the generation of 3D adipose tissue constructs by scaffold-free assembly of stem cell spheroids with potential applications in clinical and organ models.

Microscopic behavior of nano-water droplets on a silica glass surface

Recent advancements in computational science and interfacial measurements have sparked interest in microscopic water droplets and their diverse behaviors. A previous study using nonlinear spectroscopy revealed the heterogeneous wetting phenomenon of silica glass in response to humidity. Building on this premise, we employed high-resolution atomic force microscopy to investigate the wetting dynamics of silica glass surfaces at various humidity levels. Our observations revealed the spontaneous formation of nano-water droplets at a relative humidity of 50%. In contrast to the conventional model, which predicts the spreading of nanodroplets to form a uniform water film, our findings demonstrate the coexistence of nano-water droplets and the liquid film. Moreover, the mobility of the nano-water droplets suggests their potential in inducing the transport of adsorbates on solid surfaces. These results may contribute to the catalytic function of solid materials.

Network pharmacology combined with molecular docking and molecular dynamic simulation to reveal the potential mechanism of lentinan ameliorating hyperlipidemia

Hyperlipidemia is closely related to multiple diseases and is characterized by abnormal serum lipid profiles. The biological function of lentinan in mice and rats was studied, but the mechanism of its lipid-lowering effect was not completely clear. In this study, network pharmacological analysis, molecular docking, and molecular dynamics simulation were used to explore the potential mechanism of its lipid-lowering effect and high-fat diet (HFD) mice was used to confirm the predicted mechanism. Our results indicated that lentinan could ameliorate hyperlipidemia by regulating peroxisome proliferator-activated receptors (PPARs), sterol response element-binding protein-1 (SREBP1), and nuclear factor kappa-B (NF-κB) in the hepatic tissues of mices. Further animal experiment showed that lentinan could regulate the mRNA expressions of lipid metabolism-related genes, such as PPARα, PPARδ, PPARγ, cluster of differentiation 36 (CD36) and SREBP-1c. Moreover, lentinan supplementation could reduce the expressions of inflammatory cytokines such as tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6) and inducible nitric oxide sythase (iNOS). In cell model, lentinan also could inhibit oleic acid-induced lipid droplet formation and the expressions of lipid metabolism-related genes and reduced inflammatory factor expressions in HepG2 cells, which further approved the results of animal experiment. Taken together, our results suggest that lentinan can ameliorate hyperlipidemia via regulating lipid metabolism-related gene expressions and reduce obesity-induced inflammatory response.

Systematic characterization of all Toxoplasma gondii TBC domain-containing proteins identifies an essential regulator of Rab2 in the secretory pathway.

Toxoplasma gondii resides in its intracellular niche by employing a series of specialized secretory organelles that play roles in invasion, host cell manipulation, and parasite replication. Rab GTPases are major regulators of the parasite's secretory traffic that function as nucleotide-dependent molecular switches to control vesicle trafficking. While many of the Rab proteins have been characterized in T. gondii, precisely how these Rabs are regulated remains poorly understood. To better understand the parasite's secretory traffic, we investigated the entire family of Tre2-Bub2-Cdc16 (TBC) domain-containing proteins, which are known to be involved in vesicle fusion and secretory protein trafficking. We first determined the localization of all 18 TBC domain-containing proteins to discrete regions of the secretory pathway or other vesicles in the parasite. Second, we use an auxin-inducible degron approach to demonstrate that the protozoan-specific TgTBC9 protein, which localizes to the endoplasmic reticulum (ER), is essential for parasite survival. Knockdown of TgTBC9 results in parasite growth arrest and affects the organization of the ER and mitochondrial morphology. TgTBC9 knockdown also results in the formation of large lipid droplets (LDs) and multi-membranous structures surrounded by ER membranes, further indicating a disruption of ER functions. We show that the conserved dual-finger active site in the TBC domain of the protein is critical for its GTPase-activating protein (GAP) function and that the Plasmodium falciparum orthologue of TgTBC9 can rescue the lethal knockdown. We additionally show by immunoprecipitation and yeast 2 hybrid analyses that TgTBC9 preferentially binds Rab2, indicating that the TBC9-Rab2 pair controls ER morphology and vesicular trafficking in the parasite. Together, these studies identify the first essential TBC protein described in any protozoan and provide new insight into intracellular vesicle trafficking in T. gondii.

Glucose Enhances Salinity-Driven Sea Spray Aerosol Production in Eastern Arctic Waters.

Sea spray aerosols (SSA) greatly affect the climate system by scattering solar radiation and acting as seeds for cloud droplet formation. The ecosystems in the Arctic Ocean are rapidly changing due to global warming, and the effects these changes have on the generation of SSA, and thereby clouds and fog formation in this region, are unknown. During the ship-based Arctic Century Expedition, we examined the dependency of forced SSA production on the biogeochemical characteristics of seawater using an on-board temperature-controlled aerosol generation chamber with a plunging jet system. Our results indicate that mainly seawater salinity and organic content influence the production and size distribution of SSA. However, we observed a 2-fold higher SSA production from waters with similar salinity collected north of 81°N compared to samples collected south of this latitude. This variability was not explained by phytoplankton and bacterial abundances or Chlorophyll-a concentration but by the presence of glucose in seawater. The synergic action of sea salt (essential component) and glucose or glucose-rich saccharides (enhancer) accounts for >80% of SSA predictability throughout the cruise. Our results suggest that besides wind speed and salinity, SSA production in Arctic waters is also affected by specific organics released by the microbiota.

Differentiation of bone marrow mesenchymal stem cells into Leydig-like cells with testicular extract liquid in vitro.

Differentiation of Leydig cells plays a key role in male reproductive function. Bone marrow mesenchymal stem cells (BMSCs) have emerged as a potential cell source for generating Leydig-like cells due to their multipotent differentiation capacity and accessibility. This study aimed to investigate the morphological and genetic expression changes of BMSCs during differentiation into Leydig-like cells. Testicular extract liquid, which simulates the microenvironment in vivo, induced the third passage BMSCs differentiated into Leydig-like cells. Changes in cell morphology were observed by microscopy, the formation of lipid droplets of androgen precursor was identified by Oil Red Staining, and the expression of testicular specific genes 3β-HSD and SF-1 in testicular stromal cells was detected by RT-qPCR. BMSCs isolated from the bone marrow of Sprague-Dawley (SD) rats were cultured for 3 generations and identified as qualified BMSCs in terms of morphology and cell surface markers. After 14 days of induction with testicular tissue lysate, lipid droplets appeared in the cytoplasm of P3 BMSCs by Oil Red O staining. RT-qPCR detection was performed on BMSCs on the 3rd, 7th, 14th, and 21st day after induction. Relative expression levels of 3β-HSD mRNA significantly increased after 14 days of induction, while the relative expression of SF-1 mRNA increased after 14 days of induction but was not significant. BMSCs can differentiate into testicular interstitial cells with reserve androgen precursor lipid droplets after induction by testicular tissue lysate. The differentiation ability of BMSCs provides the potential to reconstruct the testicular microenvironment and is expected to fundamentally improve testicular function and provide new treatment options for abnormal spermatogenesis diseases.

Study of droplet formation in parallel flow focusing microchannel under electrostatic field control

To achieve efficient preparation of emulsion droplet, this paper uses a two-dimensional mathematical model coupled with a phase field model and an electrostatic field model to calculate the droplet formation in parallel flow focusing multichannel, and analyzes the effect of electric field strength on the droplet formation process. In addition, the effects of different capillary numbers and dispersed phase viscosity on droplet formation were also analyzed. The results show that the emulsion in the channel always generates droplet by dripping regime, and the droplet have the best mono-dispersity. Applying appropriate electric field strength can realize droplet formation frequency and size regulation. Increasing the dispersed phase viscosity increases the breakup thread of the dispersed phase fluid, and the droplet size obtained gradually decreases, the difference in droplet size can be slowed down by applying the electric field. Increasing the electrostatic force leads to a higher droplet deformation rate. The droplet shape classification is plotted using the capillary number (Ca) and electrostatic number (CaE). It is found that the droplet flow pattern in the channel remains a circle only when Ca and CaE are sufficiently small.

Understanding droplet formation in T-shaped channels with magnetic field influence: A computational investigation

This study investigates the production of ferrofluid droplets in a T-junction geometry using the level set method and magnetic force manipulation in the three-dimensional. The analysis reveals key insights into droplet formation processes in four stages: entering, blocking, necking, and detachment. The results show that increasing the Capillary number leads to a significant decrease in volume for non-ferrofluid droplets. Application of a magnetic force enhances the balance of forces during droplet formation, directly impacting droplet volume. Moreover, increasing the magnetic Bond number substantially increases droplet volume, with a more pronounced effect at lower Capillary numbers. Modifying magnetic properties influences droplet volume, with doubling the magnetization results in a significant volume increase. Overall, magnetic forces emerge as a crucial control parameter for droplet volume in ferrofluid systems, offering potential applications in droplet-based technologies and microfluidic devices.

Body Fat Distribution Contributes to Defining the Relationship between Insulin Resistance and Obesity in Human Diseases.

The risk for metabolic and cardiovascular complications of obesity is defined by body fat distribution rather than global adiposity. Unlike subcutaneous fat, visceral fat (including hepatic steatosis) reflects insulin resistance and predicts type 2 diabetes and cardiovascular disease. In humans, available evidence indicates that the ability to store triglycerides in the subcutaneous adipose tissue reflects enhanced insulin sensitivity. Prospective studies document an association between larger subcutaneous fat mass at baseline and reduced incidence of impaired glucose tolerance. Case-control studies reveal an association between genetic predisposition to insulin resistance and a lower amount of subcutaneous adipose tissue. Human peroxisome proliferator-activated receptor-gamma (PPAR-γ) promotes subcutaneous adipocyte differentiation and subcutaneous fat deposition, improving insulin resistance and reducing visceral fat. Thiazolidinediones reproduce the effects of PPAR-γ activation and therefore increase the amount of subcutaneous fat while enhancing insulin sensitivity and reducing visceral fat. Partial or virtually complete lack of adipose tissue (lipodystrophy) is associated with insulin resistance and its clinical manifestations, including essential hypertension, hypertriglyceridemia, reduced HDL-c, type 2 diabetes, cardiovascular disease, and kidney disease. Patients with Prader Willi syndrome manifest severe subcutaneous obesity without insulin resistance. The impaired ability to accumulate fat in the subcutaneous adipose tissue may be due to deficient triglyceride synthesis, inadequate formation of lipid droplets, or defective adipocyte differentiation. Lean and obese humans develop insulin resistance when the capacity to store fat in the subcutaneous adipose tissue is exhausted and deposition of triglycerides is no longer attainable at that location. Existing adipocytes become large and reflect the presence of insulin resistance.

Modifications on the coastal atmospheric sulfur and cloud condensation nuclei along the Eastern China seas by shipping fuel transition

Marine fuel combustion from shipping releases SO2 and forms sulfate particles, which may alter low cloud characteristics. A series of strategies were implemented to control the sulfur content of ship fuel oil from 2018 to 2020, offering insights into the effects of the ship fuel oil transition on sulfur-related pollutants and the consequent cloud condensation nuclei (CCN) in the atmosphere. Compared to 2018 in the southeast China waters, shipping SO2 emission decreased by 78 % in 2020, resulting in a 76 % reduction in ship-related total sulfur concentration, and a decrease of 54 % in CCN number concentration under supersaturation 0.2 % (CCN0.2) contributed by shipping. The response of CCN0.2 to ship-related sulfate modification is more pronounced in relatively clean environments than polluted environments, highlighting the uneven changes in coastal CCN along the Eastern China Sea induced by the ship fuel policies. CCN can trigger the formation of cloud droplets, 2020 fuel regulation may have and will reduce the cooling radiative forcing effect with strong spatial heterogeneity. The study provides insights into the variations in coastal atmospheric sulfur-related pollutants and CCN in uneven response to changes in ship fuel oil, prompting the need for further comprehensive assessments of the climate effects resulting from potential shifts in ship fuel use in the future.

A patient-based iPSC-derived hepatocyte model of alcohol-associated cirrhosis reveals bioenergetic insights into disease pathogenesis.

Only ~20% of heavy drinkers develop alcohol cirrhosis (AC). While differences in metabolism, inflammation, signaling, microbiome signatures and genetic variations have been tied to the pathogenesis of AC, the key underlying mechanisms for this interindividual variability, remain to be fully elucidated. Induced pluripotent stem cell-derived hepatocytes (iHLCs) from patients with AC and healthy controls differ transcriptomically, bioenergetically and histologically. They include a greater number of lipid droplets (LDs) and LD-associated mitochondria compared to control cells. These pre-pathologic indicators are effectively reversed by Aramchol, an inhibitor of stearoyl-CoA desaturase. Bioenergetically, AC iHLCs have lower spare capacity, slower ATP production and their mitochondrial fuel flexibility towards fatty acids and glutamate is weakened. MARC1 and PNPLA3, genes implicated by GWAS in alcohol cirrhosis, show to correlate with lipid droplet-associated and mitochondria-mediated oxidative damage in AC iHLCs. Knockdown of PNPLA3 expression exacerbates mitochondrial deficits and leads to lipid droplets alterations. These findings suggest that differences in mitochondrial bioenergetics and lipid droplet formation are intrinsic to AC hepatocytes and can play a role in its pathogenesis.

Phosphorylation in the Ser/Arg-Rich Region of the Nucleocapsid of SARS-CoV-2 Regulates Phase Separation by Inhibiting Self-Association of a Distant Helix

The nucleocapsid protein (N) of SARS-CoV-2 is essential for virus replication, genome packaging, evading host immunity, and virus maturation. N is a multidomain protein composed of an independently folded monomeric N-terminal domain that is the primary site for RNA binding, and a dimeric C-terminal domain that is essential for efficient phase separation and condensate formation with RNA. The domains are separated by a disordered Ser/Arg-rich region preceding a self-associating Leu-rich helix. Phosphorylation in the Ser/Arg region in infected cells decreases the viscosity of N:RNA condensates promoting viral replication and host immune evasion. The molecular level effect of phosphorylation, however, is missing from our current understanding. Using NMR spectroscopy and analytical ultracentrifugation we show that phosphorylation destabilizes the self-associating Leu-rich helix 30 amino acids distant from the phosphorylation site. NMR and gel shift assays demonstrate that RNA binding by the linker is dampened by phosphorylation, whereas RNA binding to the full-length protein is not significantly affected presumably due to retained strong interactions with the primary RNA binding domain. Introducing a switchable self-associating domain to replace the Leu-rich helix confirms the importance of linker self-association to droplet formation and suggests that phosphorylation not only increases solubility of the positively charged elongated Ser/Arg region as observed in other RNA binding proteins but can also inhibit self-association of the Leu-rich helix. These data highlight the effect of phosphorylation both at local sites and at a distant self-associating hydrophobic helix in regulating liquid-liquid phase separation of the entire protein.

Modulation of the Effect of Cisplatin on Nicotine-Stimulated A549 Lung Cancer Cells Using Analog of Marine Sponge Toxin Loaded in Gelatin Nanoparticles.

Nicotine activates nicotinic acetylcholine receptors (nAChRs), which are overexpressed in numerous cancer types, leading to signaling pathways that increase lung cancer invasiveness and resistance to chemotherapeutic agents. In this study, the effects of APS12-2, a synthetic analog of marine sponge toxin that acts as an antagonist of nAChRs, was investigated in vitro on A549 human lung adenocarcinoma cells and non-tumorigenic human lung epithelial BEAS-2B cells. In addition, gelatin nanoparticles (GNPs) loaded with APS12-2 (APS12-2-GNPs) were prepared and their effects were compared with those of free APS12-2. Nicotine reduced cytotoxicity, the formation of reactive oxygen species, and the formation of lipid droplets caused by cisplatin on A549 cells. The effects of nicotine on the decreased efficacy of cisplatin were reduced by APS12-2 and APS12-2-GNPs. APS12-2-GNPs showed a substantial advantage compared with free APS12-2; the cytotoxicity of APS12-2 on BEAS-2B cells was greatly reduced when APS12-2 was loaded in GNPs, whereas the cytotoxicity on A549 cells was only slightly reduced. Our results suggest that both APS12-2 and APS12-2-GNPs hold promise as supportive agents in the cisplatin-based chemotherapy of lung cancer.

Cloud response to co-condensation of water and organic vapors over the boreal forest

Abstract. Accounting for the condensation of organic vapors along with water vapor (co-condensation) has been shown in adiabatic cloud parcel model (CPM) simulations to enhance the number of aerosol particles that activate to form cloud droplets. The boreal forest is an important source of biogenic organic vapors, but the role of these vapors in co-condensation has not been systematically investigated. In this work, the environmental conditions under which strong co-condensation-driven cloud droplet number enhancements would be expected over the boreal biome are identified. Recent measurement technology, specifically the Filter Inlet for Gases and AEROsols (FIGAERO) coupled to an iodide-adduct chemical ionization mass spectrometer (I-CIMS), is utilized to construct volatility distributions of the boreal atmospheric organics. Then, a suite of CPM simulations initialized with a comprehensive set of concurrent aerosol observations collected in the boreal forest of Finland during spring 2014 is performed. The degree to which co-condensation impacts droplet formation in the model is shown to be dependent on the initialization of temperature, relative humidity, updraft velocity, aerosol size distribution, organic vapor concentration, and the volatility distribution. The predicted median enhancements in cloud droplet number concentration (CDNC) due to accounting for the co-condensation of water and organics fall on average between 16 % and 22 %. This corresponds to activating particles 10–16 nm smaller in dry diameter that would otherwise remain as interstitial aerosol. The highest CDNC enhancements (ΔCDNC) are predicted in the presence of a nascent ultrafine aerosol mode with a geometric mean diameter of ∼ 40 nm and no clear Hoppel minimum, indicative of pristine environments with a source of ultrafine particles (e.g., via new particle formation processes). Such aerosol size distributions are observed 30 %–40 % of the time in the studied boreal forest environment in spring and fall when new particle formation frequency is the highest. To evaluate the frequencies with which such distributions are experienced by an Earth system model over the whole boreal biome, 5 years of UK Earth System Model (UKESM1) simulations are further used. The frequencies are substantially lower than those observed at the boreal forest measurement site (< 6 % of the time), and the positive values, peaking in spring, are modeled only over Fennoscandia and the western parts of Siberia. Overall, the similarities in the size distributions between observed and modeled (UKESM1) are limited, which would limit the ability of this model, or any model with a similar aerosol representation, to project the climate relevance of co-condensation over the boreal forest. For the critical aerosol size distribution regime, ΔCDNC is shown to be sensitive to the concentrations of semi-volatile and some intermediate-volatility organic compounds (SVOCs and IVOCs), especially when the overall particle surface area is low. The magnitudes of ΔCDNC remain less affected by the more volatile vapors such as formic acid and extremely low- and low-volatility organic compounds (ELVOCs and LVOCs). The reasons for this are that most volatile organic vapors condense inefficiently due to their high volatility below the cloud base, and the concentrations of LVOCs and ELVOCs are too low to gain significant concentrations of soluble mass to reduce the critical supersaturations enough for droplet activation to occur. A reduction in the critical supersaturation caused by organic condensation emerges as the main driver of the modeled ΔCDNC. The results highlight the potential significance of co-condensation in pristine boreal environments close to sources of fresh ultrafine particles. For accurate predictions of co-condensation effects on CDNC, also in larger-scale models, an accurate representation of the aerosol size distribution is critical. Further studies targeted at finding observational evidence and constraints for co-condensation in the field are encouraged.

Hansenula polymorpha cells lacking the ER-localized peroxins Pex23 or Pex29 show defects in mitochondrial function and morphology.

Pex23 family proteins localize to the endoplasmic reticulum and play a role in peroxisome and lipid body formation. The yeast Hansenula polymorpha contains four members: Pex23, Pex24, Pex29 and Pex32. We previously showed that loss of Pex24 or Pex32 results in severe peroxisomal defects, caused by reduced peroxisome-endoplasmic reticulum contact sites. We now analyzed the effect of the absence of all four Pex23 family proteins on other cell organelles. Vacuoles were normal in all four deletion strains. The number of lipid droplets was reduced in pex23 and pex29, but not in pex24 and pex32 cells, indicating that peroxisome and lipid droplet formation require different Pex23 family proteins in H. polymorpha. In pex23 and pex29 cells mitochondria were fragmented and clustered accompanied by reduced levels of the fusion protein Fzo1. Deletion of DNM1 suppressed the morphological phenotype of pex23 and pex29 cells, suggesting that mitochondrial fusion is affected. pex23 and pex29 cells showed retarded growth and reduced mitochondrial activities. The growth defect was partially suppressed by DNM1 deletion as well as by an artificial mitochondrion-endoplasmic reticulum tether. Hence, the absence of Pex23 family proteins may influence mitochondrion-endoplasmic reticulum contact sites.

Computational insights into gas atomization of FeCoNiCrMoBSi high-entropy alloy: From droplet formation to rapid solidification

The intricate processes governing the gas atomization of molten metal droplets and their subsequent solidification hold paramount significance in materials science. Computational fluid dynamics simulations have emerged as indispensable tools for unraveling the complexities inherent in metal melt atomization. This study employed the volume of fluid method and the shear-stress transport k-ω turbulence model to simulate the primary atomization process of a FeCoNiCrMoBSi high-entropy alloy. Subsequently, the discrete phase model and Taylor analogy breakup model, based on the gas Weber number and incorporating primary atomization outcomes as initial conditions, were utilized to simulate droplet formation during the secondary atomization process. Analysis of the particle size distribution at the outlet of the geometric model demonstrated excellent agreement with experimental data for gas-atomized FeCoNiCrMoBSi high-entropy alloy powder. Furthermore, comprehensive characterization analyses were conducted to probe the phase constitution and structure of FeCoNiCrMoBSi powder produced by gas atomization. The results revealed that, irrespective of particle size, the powder exhibited a face-centered cubic structure and distinctive eutectic microstructural characteristics. The numerical simulation provided insights into the solidification process of secondary droplets by integrating inverse pole figure data for gas-atomized powder across varying particle sizes. The estimated cooling rate of secondary droplets ranged from 1.22 × 104 K/s to 2.64 × 105 K/s. These findings significantly advance the understanding of the gas atomization mechanism of the FeCoNiCrMoBSi high-entropy alloy, paving the way for the development of more efficient manufacturing processes for advanced materials.

ПРИМЕНЯЕМОСТЬ ВОДОГАЗОВЫХ ФОРСУНОК ДЛЯ ПОЖАРОТУШЕНИЯ ТОНКОРАСПЫЛЕННОЙ ВОДОЙ

The low efficiency of traditional water extinguishing systems is due to the formation of large droplets. Large droplets have a small external surface area, which causes poor heat removal from the ignition source. A large external surface area of droplets is provided by fire extinguishing systems with thinly sprayed water. They are effective in extinguishing fires at the initial stage of a fire in confined spaces and ensure the formation of droplets less than 150 microns. The analysis showed that water-gas nozzles with co-directional flows of water and gas are suitable for creating finely dispersed water with a droplet size of less than 100 microns. To ensure significant heat removal from the ignition source, the average diameter of the droplets of finely dispersed water should be less than 80 microns. A technique for determining the size of droplets when sprayed with water-gas nozzles is presented. According to the method, the calculation of the average diameter of droplets was carried out depending on the ratio of volume flow rates of gas and water. It is shown that fire extinguishing with finely sprayed water with the help of water-gas nozzles is effective at a gas pressure in front of the annular gap from 0,4 MPa to 0,6 MPa and the ratio of volumetric air flow to volumetric water flow is more than 2 000.

Effect of fluid properties on intensification of heat transfer process in oil-water droplet flow in a T-shaped microchannel

Droplet-based microfluidics refers to the production and utilization of micrometer-sized droplets. This technology has found widespread applications in drug delivery, biotechnology, disease prevention, chemical analysis, cell research, and functional material synthesis. Cooling of high heat flux electronic systems and hot spots is another application of the droplet flow which is focused by the current work. In this paper, formation and hydrothermal performance of oil droplets in water flow in a T-junction microchannel is studied by a 3D numerical simulation. Effects of different parameters such as surface tension, wettability and heat flux on the droplet size, heat transfer rate and pressure drop are investigated. It is observed that the shear between the discrete and continuous phases results in recirculating zones in both phases which contribute to improved mixing and heat transfer rates. Liquid film thickness adjacent to the heated surface and the droplet velocity are two other factors that positively affect the heat transfer. Decreasing the surface tension is shown to enhance the heat transfer rate. Moreover, an optimum value is found for the contact angle as 135° at which a 23 % heat transfer enhancement is achieved. Results also indicate that droplet size decreases with increase of contact angle while it slightly increases with increase of the surface tension and negligibly varies with the applied heat flux.

Enhancing carbon capture: Exploring droplet wetting and gas condensation of carbon dioxide on nanostructured surfaces

The investigation of carbon dioxide (CO2) condensation on heat exchange surfaces is essential to the advancement of carbon capture, utilization, and storage (CCUS) technology. Molecular dynamics simulations are employed to explore the wetting and condensation behavior of CO2 on nanostructured surfaces. The results indicate that the contact angle of CO2 droplets on nanostructured surfaces is greater than that on smooth surfaces. Increasing the pillar height (h) or solid fraction (f) induces the transition of CO2 droplets from the Wenzel to Cassie state, resulting in an increased contact angle. Nanostructured surfaces significantly enhance the nucleation rate, with molecules initially nucleating at the bottom of the pillars. A higher h or f accelerates the nucleation rate during the condensation. Droplets in the Wenzel state exhibit higher heat transfer efficiency than those in the Cassie state. Additionally, the formation of Cassie-state CO2 droplets undergoes a dewetting transition, altering the heat conduction mode. The dewetting behavior of CO2 droplets favors their detachment from the surface, potentially reducing the initial heat resistance. Therefore, appropriately increasing h and f can promote nucleation and droplet growth, enhancing dewetting transition and mass transfer performance. These simulation results hold great importance for inspiring the design of future CO2-phobic surfaces and guiding CO2 condensation production.

Curcumin Inhibits α-Synuclein Aggregation by Acting on Liquid-Liquid Phase Transition.

Parkinson's disease (PD), the second most common neurodegenerative disorder, is linked to α-synuclein (α-Syn) aggregation. Despite no specific drug being available for its treatment, curcumin, from the spice turmeric, shows promise. However, its application in PD is limited by a lack of understanding of its anti-amyloidogenic mechanisms. In this study, we first reconstructed the liquid-liquid phase separation (LLPS) of α-Syn in vitro under different conditions, which may be an initial step in entraining the pathogenic aggregation. Subsequently, we evaluated the effects of curcumin on the formation of droplets, oligomers, and aggregated fibers during the LLPS of α-synuclein, as well as its impact on the toxicity of aggregated α-synuclein to cultured cells. Importantly, we found that curcumin can inhibit amyloid formation by inhibiting the occurrence of LLPS and the subsequent formation of oligomers of α-Syn in the early stages of aggregation. Finally, the molecular dynamic simulations of interactions between α-Syn decamer fibrils and curcumin showed that van der Waal's interactions make the largest contribution to the anti-aggregation effect of curcumin. These results may help to clarify the mechanism by which curcumin inhibits the formation of α-Syn aggregates during the development of PD.